
FLIGHT CLAVE23+
The Flight Clave23+, available from All Practice Solutions, is a Class S steam sterilizer built for practices that need fast, reliable turnaround on instruments between patients, with a 23L chamber (9.72" x 17.7") holding 4 trays. It uses steam injection pressure pulsing with an independent steam generator for positive pressure displacement, and offers dedicated cycles for solid/unwrapped instruments (4 min at 134°C or 20 min at 121°C, 45 min total with drying), wrapped instruments (10 min at 134°C or 30 min at 121°C, 50 min total), and liquids/textiles/rubbers (10 min at 134°C or 30 min at 121°C, 65 min total), plus additional cycles for prion decontamination. Ultra-fast closed-door drying, assisted by an integrated air compressor, cuts down on wait time between loads.
- Offer valid until September 30, 2026.
Choose options

Overview
The Clave23+ Chamber Autoclave is a Class S Steam Sterilizer that utilizes the most state-of-the-art technology in steam pulsing sterilization. The Clave23+ uses a pressure displacement technology that allows a more complete removal of air inside the chamber before the sterilization cycle begins. In addition, with the steam injection pressure pulsing technology it reduces maintenance, improves sterilization effectiveness and increases speed of the sterilization process.
The Clave23+ uses the highest quality components and each unit is stress tested to ensure the quality and reliability of the machine. The Clave23+ is compact and efficient sterilizer is suitable for any dental, veterinary, podiatry, chiropodist, tattoo, medical and beauty office.
As the name suggests this is the largest chamber autoclave offered by Flight Dental Systems at 23L in capacity.
The Clave23+ also has an air assisted drying technology which integrates a compressor for faster drying.
Specifications
- Easily accessible and easy to fill.
- Water Level Sensor
- Capacity to run 5-6 Cycles Before Adding water
Maintenance Schedule
| Frequency | Maintenance Required |
|---|---|
| Daily | Clean Door Seal, Clean the External Surface |
| Weekly | Clean Distilled Water Reservoir, Clean Sterilization Chamber |
| Monthly | Clean Filter inside Chamber and Tank |
| Every 3/6 Months | Replace Door Seal |
| Every Year | Replace Silicone Tubing, filters and door Seal |
| Every 2 Years | Replace Battery on Main PCB that Controls Timer |
Model: Clave23+
| Chamber Size | 23L (9.72” x 17.7”) |
| Number of Trays | 4 |
| Voltage | 110V 50/60Hz |
| Power (W) | 1600 |
| Overall Dimensions (WxHxD) | 18.9” x 18.3” x 27.6” |
Programmed Cycle
- Solid/Unwrapped: 4 min Sterilization @134°C, 20 min Sterilization @121°C. Total Time: 45 min including Drying
- Wrapped: 10 min @134°C, 30 min @121°C. Total Time: 50 min including Drying
- Liquid/Textile/Rubbers: 10 min @134°C, 30 min @121°C. Total Time: 65 min including Drying
Key Features:
- Class S Steam Sterilizer with air assisted Drying Technology
- Ultra-fast Closed door drying with air assisted drying
- 5 Programmed Sterilizations Cycles: Solid/Unwrapped, Wrapped, Liquid, Textile, Prions
- Solid Steel Construction
- Steam Injected Pressure Pulsing Sterilizer
- Independent Steam Generator for positive pressure displacement
- Easy to repair – Quality Parts Made in Europe
- Built-in Printer Included
- USB Port for Recording Cycles
- Double Door Protection System – Prevents door from opening during Cycles
- Pressure Safety valve
Key Selling Points:
- Fast Sterilization Cycles – Unwrapped: 4min, Wrapped: 10 min, Rubber/Textiles: 10min
- Larger Chamber compared to Statim with Similar Sterilization Time
- 2 Year Parts Warranty